Attaching the base
It has a structure that hooks on the outer frame of the air conditioner vent finisher.
Please use double-sided tape together to prevent lateral movement and accidental dropout.
Flatness / Clearance
The holder mounting plane is 36mm x 36mm, so even large smartphone holders can be mounted without protruding.
In addition, it is designed so that there is no interference with the air conditioner vent fin even after installation.
Double-sided tape
For installation, please prepare double-sided tape with a thickness of 1.2mm to 1.5mm for fixing interior accessories.
(*Do not use double-sided tape on the leather-wrapped instrument panel as it may cause damage or color transfer.)
A base unit for attaching a commercially available smartphone holder specially designed for ND Miata and RF.
By using this product, you can secure a flat surface of 36mm x 36mm, so you can securely and neatly fix the holder with double-sided tape.
The mounting position can be installed next to the hazard switch on the center vent or on the passenger side end.By hooking it on the frame of the center vent, it is designed so that it does not affect the movement of the vent fin while achieving a secure hold.
For secure fixation, please use double-sided tape.
We recommend using 1.2mm double-sided tape for fixing accessories in the car.
Cut it into 5 mm width and stick it on the grooves on the top and bottom of the product.
However, please avoid using double-sided tape on the leather-wrapped dash panel.
Problems such as damage and color transfer may occur.
*1: This product is only the base part and does not include the smartphone, smartphone holder, or double-sided tape.
*2: Be especially careful not to scratch peripheral parts when removing. We are not responsible for scratches.
*3: Abarth 124 Spider cannot be installed because the shape of the air outlet is different.
*Specifications are subject to change without notice for product improvement.